EinScan-SP - Desktop-3D-Scanner

3D-Scanner - just ₤ 2.249

Extra offer free of charge
installation help + data processing


  • White-Light-Scanner
  • Motorised rotary table
  • Telescope tripod
  • HD-calibration card

Special price:

₤ 2.249

Installation help

The mako-technics team will help you with every step of the way with your new 3D scanner.

We will call you and advise you free of charge when installing your SHINING3D EinScan-SP.

Free help

We offer two hours of data processing free of charge to all users who need optimised (area- recirculated) parametric volume data for CAD systems or high-quality 3D prints after scanning.

As a professional for reverse engineering
mako-technics recommends you the 3D desktop scanner from SHINING3D


Scanning objects with a EinScan-SP is easier than ever. For the price of ₤ 2.499,00 you get a handy sized scanner that scans objects up to an accuracy of 0,05mm. In addition, you benefit from our free service


mako-technics converts scanned point clouds into CAD data with optimized surfaces. With the help of mako-technics you can process your product geometry without expensive software or employee training into top quality for any CAD system.

Premium 3D-Desktop-Scanner

EinScan-SP offers to professional industrial users everything to create excellent 3D models with little effort. The entire setup is very simple and ready for the first scan in about 10 minutes. From setting up the scanner, to installing the software, to calibrating the system. The scanner can be set up intuitively with the help of a very easy to understand user guide.

The scanner comes with everything you need to scan. The device is equipped with a self-rotating table, which allows objects up to 200 x 200 x 200 mm to be captured automatically at different intervals from all sides. For objects larger than 200 x 200 x 200 mm, an additional tripod is included. The tripod can be used to scan larger objects with a maximum size of 1200 x 1200 x 1200 mm

The scan module has 2 cameras and a white light beamer to ensure the tolerances as described. The two cameras record the projected white light pattern and the software creates a 3D image of it. This 3D image consists of a triangulated surface and is saved in STL format. This STL provides an excellent base for all types of data service and reverse engineering. Specialised engineers use the scan data together with the images to identify the original intention of each surface. We use reverse engineering software to exactly rebuild the surfaces and create a CAD file with parametric volume data for your further use.


A new generation
3D-Scanner & Software

  • Automatic calibration (no fixed setup required)
  • Scan with just one click
  • Automatic alignment / merging for direct mesh creation
  • Scans are created with at least 30% overlap to the previous scan
  • Automatic merging of various data scans
  • Manual very simple merging of different scans (manual)
  • Teamviewer
  • Marking points
  • Rotatable marking points
  • On the object geometry
  • Manually alignment
  • Duration for a single scan: 4 sec.
  • Duration for a 360° Scan on automatic mode: 1 min
  • A high accuracy of only 0.05 mm for single scans
  • 3D scanning technology with structured light, excellent reconstruction of the real geometry of the object with many details.
  • Safe use of white light (no laser) is safe for the eye

Technical details

Scan modes

Static or automatic

File format

.obj .stl .asci .ply

single recording accuracy

≤ 0,05 mm

Area of single recording

200 x 150 mm

Camera resolution

1.3 Megapixel

EinScan-SP attachments

Scan area

smallestr 30 x 30 x 30 mm

largest 1200 x 1200 x 1200 mm


570 x 210 x 210 mm

Load capacity of the table

5 kg

Point distance

0,17 mm – 0,2 mm

Calibration card


Order now here!

Get free of charge 2 hour data processing & installation support from mako-technics

By agreeing this, you accept the order conditions. By submitting the order form you enter into a binding contract with our partner OfficeXpress.